|*|
A single power supply is used in the illustration. If the loads you want to control are between 6 and 12 volts (the upper limit for SS963 v5C is 30v), you can use the power supply for the supply of SS963. In this case you can connect the anode of the source(+ pole) to the anode input of the SS963 (B terminal). When linking, be careful not to connect the terminal B to the cathode (- pole). Otherwise, you may cause damage to the power supply and the SS963. (This risk has been removed for SS963 v5C)
In such a connection, it is necessary to use a DC power supply with good regulation and power capacity so that the SS963 can operate steadily. Only a good power supply can prevent sudden and excessive power changes. We recommend you to use a power supply that can supply 1.5 times and more of the current capacity you need.
